Hondaline Heated Grips 10/3/2004

Honda Part Number 08P73 MCS 800A

You must first install the Hondaline Quartet wiring harness before installing the heated grips.


Here's what comes in the box.


Remove the bar end weights.


You can easily remove the stock grips by getting some rubbing alcohol between the grips and the bars. They'll slip right off.


Apply grip cement to the bars, spray some rubbing alcohol on the cement and the grips will slide right on.


I trimmed the right flange off the right grip to allow the Vista Cruise to be installed.


These are the four plugs from the Handaline quartet harness. You read what the are used for at the bottom of this page.


Cut the hole in the left pocket using the supplied template and install the grip controlled. I drilled around the opening
outline and then used a Dremel to finish the job.


Here's what it looks like when the fairing panel is reinstalled.

Return to ST1300 Farkels page.
Return to Motorcycle  links page.