Galfer Brake Line Installation
4/13/2003
Over head view of new lines.
Front line routing.
One line for each front brake.
Right front line at caliper.
Left front line. Really not enough bend in the banjo, but it still works.
Line at clutch.
Clutch line following stock route. I re-used the stock rubber bushings per Ray Stevens.
Front lines on their way down to the calipers.
Tank out, ready for the rear line.
The stock lines.
The Galfer in place.
I re-used the stock mounts by wrapping the Galfer line in wire loom and electrical tape.
More of the stock line mounts on the swing arm.
Connection at the rear caliper.