FI MAP Sensor Error
8/9/2011
One morning my by bike started, but didn’t idle properly. The FI light on the dash came on. Six different errors were report by the ECU. I cleared the errors and restarted the bike. This time just one error, two flashes for the MAP sensor. The sensor was actually fine. There was just a greasy plug in the 5-way tee connecting the hoses from the manifold to the MAP sensor. I could blow it out, I had to use a paper clip to push it out.
I like to use a 2×4 to hold the tank up.
MAP sensor is the black box, with the blue top and the gray connector attached.
This is the 5-way tee that was plugged and causing the fault.