Image activities | ||
Back to index page | ||
Next image | ||
Information | ||
01_Connectors.jpg | ||
JPEG | ||
Resolution: 640×480 | ||
File size: 66201 bytes | ||
Date: 7/10/06 6:05 PM | ||
Flash: Flash fired, red-eye reduction | ||
Focal length: 16.0mm | ||
Exposure time: 1/60s | ||
Aperture: 3.5 | ||
Metering mode: Center weighted average | ||
Camera: Canon | ||
Model: Canon PowerShot S2 IS | ||
Sensor type: OneChipColorArea | ||
The white connector towards the lower right side is the one from the ignition switch. I found the terminals had a bit of corrosion on them, so I sprayed contact cleaner on them before I reassembled the connector. While I was at it, I did the same for the other three connectors in the metal plate. I had to remove the plate mounting bolt and lift the plate in order to be able to release the latches and unplug the connectors. See, a job always is a little bigger than you anticipate, isn't it?