BLM Accessories Antenna Mount, Comet CA-2x4SR Antenna & C213 Base 10/8/2005

The BLM Accesories antenna bar. Available in one side or two sided configurations.

The back side of the bar has a nice stiffener with holes for tying down the antenna leads.

The stock bolts are replaced with longer stainless bolts.

Slip the provided spacers over the bolts and attach the bar.

The Diamond C213 antenna base attaches to the bar as shown here.

The excess antenna wire is coiled under the seat as shown here.

Yaesu VX-6R radio.

The Comet CA-2x4SR antenna in place.

The topbox mounting rack was ground my antenna mount and inducing ground loop noise. I used nylon bolts and washers
to isolate the rack from the frame. This eliminated the ground loop noise from the radio system.

Return to ST1300 Farkels page.
Return to Motorcycle  links page.