Hotgrips Installation

The Heat-Troller is mounted on top of my PIAA relay in the
lower left. The power leads are the red and black wires running
to the auxiliary fuse panel. The purple and white wires run to
the grips.

I mounted a power buss on the air cleaner housing to connect
the power leads from the Heat-Troller to the leads of the Hotgrips.

I mounted the remote power knob at shown on the steering
vanity cover.

Here's a close up of the control knob location.

Return to ST1100 Farkels page.
Return to Motorcycle  links page.