Autocom Earbud Tap 7/23/2003

The 5 pin DIN connectors were $4.00, the stereo jack is from Rat Shack, one piece of
CAT 5 cable and a short peice of 3 conductor wire. I pulled 2 conductors out of the CAT 5
and used the remaining 3 pairs for the pass through from DIN to DIN. Then just tapped
the stereo jack to speakers ground, right and left!

Looking at the female DIN on the Autocom:
9:00 is mic
10:30 is mic ground
12:00 is ground
1:30 is right speaker
3:00 is left speaker

Here's a shot of the cable velcroed in place with my custom
Challenger M Earplugs in place. I bought them from the Ear Plug
Store

Return to ST1100 Farkels page.
Return to Motorcycle  links page.