Mazda Strakes 1/14/2006

Remove the four screws shown and pull off the lower section of the mud guard.

Reach in behind the mud guard and squeeze and push out the plastic screen.

Attach the strakes through the holes as described in the documentation. Keep the
bolts loose and the retainers rotated up as shown. They'll be rotated down later.

The assembly all ready to be reinstalled. The retainers will be rotated down
and behind the two metal cross members seen in the opening once in place.

Strakes in place.

Looking good!!

Return to RX8 Modifications page.
Return to Adam's Mazda RX8 page.