Clear Corners and Stealth Bulbs from Mazdatrix.com 1/24/2006

As described by many before me, removing the internal reflectors yields a better
looking finished product. Pry it loose with a screw driver and bend it with needle
nose pliers to make it small enough to remove through the bulb opening.

Turn the wheels away from the side you're working on and remove the two upper
plastic clips.

Pry the plastic back to expose the screw holding the lens in place.

Push down on the back end of the lens, then pull it away from the fender to remove it.

Here are the Stealth bulbs to replace the stock yellow bulbs.

Stealth bulb in place.

The new clear corners are more sculpted than the stock lenses.

Clear corners in place. Nice!

Clear corners with Stealth bulbs turned on.

Here's what the stock turn signal bulbs look like. Ugly!

Stealth bulbs for the front and rear turn signals.

Stealth bulbs in place, unlit.

Stealth bulbs in place, lit. The Stealth turn signal bulbs really do turn yellow!

Rear Stealth bulbs in place.

Return to RX8 Modifications page.
Return to Adam's Mazda RX8 page.